본문 바로가기

쇼핑(할인)정보

저렴한 DIY 오실로 스코프와 관련 제품들 - DSO138 DSO150 and etc

저도 구매할 물건을 빨리 정리해야 하는데 최근 며칠간 바빠서 할인 상품 정보를 보고도 확인을 못 했었는데

오늘 특가로 나온 상품 정보를 보고 방문했더니 이벤트 상품 중에 관심 가는 제품이 몇 가지 있었네요.

살펴보니 행사하는 제품들 중 10월 말까지는 10% 추가 할인 쿠폰도 지급되어서 좀 더 저렴했을 텐데 살짝 아쉽군요...


현재 진행 중인 행사 품목의 메인 화면입니다.

크리스마스를 대비해서 크리스마스 트리 등 LED를 사용하는 다양한 할인 제품들이 있으니 참고하세요.

http://www.banggood.com/collection-2467.html?p=VK0122929690201412SR



그리고 메가 딜이라고 11.11에 대박 특가 상품도 있고 태블릿 등의 할인 상품도 있으니 관심 있는 분들은 참고하세요.

http://www.banggood.com/2016singleday1111.html?p=VK0122929690201412SR 



예전부터 고민하던 제품이었는데 오늘 특가로 나온 오실로 스코프와 관련된 제품들도 있어서 나중을 위해 기록해 놓습니다.


http://www.banggood.com/DSO138-DIY-Digital-Oscilloscope-Kit-SMD-Soldered-13803K-Version-p-984002.html?p=VK0122929690201412SR 

$19.49 - Orignal JYE Tech DSO138 DIY Digital Oscilloscope Kit SMD Soldered 13803K Version


 

기존과 달리 SMD 부품들은 납땜되어 있고 일부 부품들만 납땜하면 되는 신규버전 같네요.

 


Orignal JYE Tech DSO138 DIY Digital Oscilloscope Kit SMD Soldered 13803K Version

This version SMD is soldered, is much easier than SKU206166 version.

This is the newest version, SMD is 13803K (113-13801-050), the hardware difference with 13801K is the resistance of R11 is 150 ohms.

Features:

Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display can be used as ARM test development board.
Available source, Capable people can be secondary development on the basis of the suite, for example, it can be changed to Millivoltmeter, data loggers, and so on (we don't supply any technical support about that).
Circuit is simple and the kit is inexpensive

Description:
PCB size: 117 x 76mm
Screen size: 52 x 40mm
Supply voltage: DC 9V

Characteristics of indicators:
Maximum real-time sampling rate: 1Msps
Accuracy: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0 - 200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling modes: DC / AC / GND
The horizontal time base range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
With automatic, regular and one-shot mode, easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position, and with instructions
Observable previous trigger waveform (negative delay)
Can freeze at any time waveform display (HOLD function)
Comes 1Hz /3.3V square wave test signal source

Note: This is a DIY kit, need to have some basic electronic activity and ability, because of different levels of ability and technical, we can not guarantee that everyone can DIY success, but we are committed to do our best of after-sales service.
Here is the EN manual, please careful read it before you DIY this kit. (Click here to open)




http://www.banggood.com/DSO138-DIY-Digital-Oscilloscope-Kit-13804K-Version-With-Transparent-Acrylic-Housing-p-1051617.html?p=VK0122929690201412SR

$30.99 - Orignal JYE Tech DSO138 DIY Digital Oscilloscope Kit 13804K Version With Transparent Acrylic Housing

 


위제품에 아크릴 케이스까지 포함된 제품입니다.

제공되는 동영상을 참고하는 게 가장 빠르리라 봅니다.

 

Orignal JYE Tech DSO138 DIY Digital Oscilloscope Kit 13804K Version With Transparent Acrylic Housing

SMD is unsoldered and without instruction about how to solder the SMD.
This is the newest version 13804K (113-13801-050). (Update in 2015-09-01, CN warehouse at present. EU&USA warehouse is the newest version, update in 2015-12-22)


Features:

Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display can be used as ARM test development board.
Available source, Capable people can be secondary development on the basis of the suite, for example, it can be changed to Millivoltmeter, data loggers, and so on (we don't supply any technical support about that).
Circuit is simple and the kit is inexpensive

Description:
PCB size: 117 x 76mm
Screen size: 52 x 40mm
Supply voltage: DC 9V

Characteristics of indicators:
Maximum real-time sampling rate: 1Msps
Accuracy: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0 - 200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling modes: DC / AC / GND
The horizontal time base range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
With automatic, regular and one-shot mode, easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position, and with instructions
Observable previous trigger waveform (negative delay)
Can freeze at any time waveform display (HOLD function)
Comes 1Hz /3.3V square wave test signal source

Note: This is a DIY kit, need to have some basic electronic activity and ability, because of different levels of ability and technical, we can not guarantee that everyone can DIY success, but we are committed to do our best of after-sales service.
Here is the EN manual, please careful read it before you DIY this kit. (Click here to open)

Package included:
1 x DIY Digital Oscilloscope Kit
1 x DSO138 Transparent Acrylic Sheet




http://www.banggood.com/Orignal-JYE-Tech-DS0150-15001K-DSO-SHELL-DIY-Digital-Oscilloscope-Kit-With-Housing-p-1093865.html?p=VK0122929690201412SR

$28.79 - Orignal JYE Tech DS0150 15001K DSO-SHELL DIY Digital Oscilloscope Kit With Housing

 


오늘 특가로 나온 제품인데 이곳에서 제일 먼저 할인 하나 봅니다.

성능은 어떨지 모르겠지만 기존의 엄청난 부품을 납땜하는 것과 달리 심플하고 케이스 포함인데 저렴하더군요.





Note:
This is a DIY kit, need to have some basic electronic activity and ability.
SMD soldered version, operation is more easier.

Features:
Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display can be used as ARM test development board.
Circuit is simple and the kit is inexpensive

Characteristics of indicators:
Supply voltage: DC 9V
Maximum real-time sampling rate: 1Msps
Accuracy: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0 - 200KHz
Vertical Sensitivity: 5mV / Div - 20V / Div
Adjustable vertical displacement, and with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling modes: DC / AC / GND
The horizontal time base range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
With automatic, regular and one-shot mode, easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position, and with instructions
Observable previous trigger waveform (negative delay)
Can freeze at any time waveform display (HOLD function)
Comes 1Hz /3.3V square wave test signal source

Package includes:
1 x DIY DS0150 Digital Oscilloscope Kit
1 x EN Instruction




http://www.banggood.com/XR2206-Function-Signal-Generator-DIY-Kit-Sine-Triangle-Square-Output-1HZ-1MHZ-p-1060825.html?p=VK0122929690201412SR

$7.19 - XR2206 Function Signal Generator DIY Kit Sine Triangle Square Output 1HZ-1MHZ

 



http://www.banggood.com/DIY-M12864-Graphics-Version-Transistor-Tester-Kit-LCR-ESR-PWM-p-986954.html?p=VK0122929690201412SR

$14.3 - Orignal Hiland DIY M12864 Graphics Version Transistor Tester Kit LCR ESR PWM

 


http://www.banggood.com/0-28V-0_01-2A-Adjustable-DC-Regulated-Power-Supply-DIY-Kit-Short-Circuit-Current-Limiting-Protection-p-1060253.html?p=VK0122929690201412SR

$14.48 - Orignal Hiland 0-28V 0.01-2A Adjustable DC Regulated Power Supply DIY Kit Short Circuit Current Limiting Protection

 

가벼운 작업에 사용할 목적의 파워 서플라이를 만들기에 좋을 것 같아 보이네요.



오실로 스코프와 관련된 것 같기도 한데.. 파형 발생기나 함수 발생기 등이 있더군요.

으.. 그러고 보니 예전에 저가형 오실로 스코프를 구매하려고 빡세게 검색했을 때에 살펴봤었던 개념인 것 같은데... 기억이 하나도..ㅜㅜ